===under info was translated buy computer, please contact the info poster===
| Manufacturer (origin): | Diren Jiaxing |
|---|
| Level: Processing | Grade Injection |
|---|
| Grade: | L-1225Z |
|---|
| Level: Characteristic | UV transparent, Standard Grade, Anti |
|---|
| Approach: Sales | Distribution Brand |
|---|
| Level: Application | Class lighting, fixture Electrical, Components General |
|---|
| Items Performance | Condition Test | Method Test | Description Numerical | Company |
| Properties Mechanical | Strength Tensile (lead Zhang Qiangdu) | | ASTM D638/ISO 527 | 2130/2400 | Kg/cm2 (MPa) [Lb/in2] |
| Elongation At Break | | ASTM D638/ISO 527 | 63/61 | % |
| Modulus Tensile | | ASTM D638/ISO 527 | | Kg/cm2 (MPa) [Lb/in2] |
| Tensile Yield Elongation (elongation) | | ASTM D638/ISO 527 | 140 | % |
| Break Tensile Elongation At (elongation) | | ASTM D638/ISO 527 | 6 | % |
| Modulus Bending (elasticity bending) | | ASTM D790/ISO 178 | | Kg/cm2 (MPa) [Lb/in2] |
| Strength Bending | | ASTM D790/ISO 178 | 94/93 | Kg/cm2 (MPa) [Lb/in2] |
| Hardness Luo's | | ASTM D785 | 77 | |
| Strength IZOD Notched Impact | 1/4& 23 | ASTM D256/ISO 179 | 71 | Kg· cm/cm (J/M) ft· lb/in |
| 1/4& -30 | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| 1/8& 23 | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| 1/8& -30 | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| Charpy Impact Strength | 23 (GAP) | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| -30 (GAP) | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| 23 (gap no) | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| -30 (gap no) | ASTM D256/ISO 179 | | Kg· cm/cm (J/M) ft· lb/in |
| Property Physical | Gravity Specific (density) | | ASTM D792/ISO 1183 | 1.2 | |
| Molding Shrinkage Rate | | ASTM D955 | 0.50.7 | % |
| Index Melt (coefficient flow) | 200 /5kg | ASTM D1238/ISO 1133 | 11 | G/10min |
| 220 /10kg | ASTM D1238/ISO 1133 | 0.00007 | G/10min |
| Of Water Absorption Rate 23 /24H | | ASTM D570/ISO 62 | 0.2 | % |
| Performance Thermal | Heat Distortion Temperature | Annealing | ASTM D648/ISO 75 | | (Fahrenheit degrees) |
| Annealing No | ASTM D648/ISO 75 | 141 | (Fahrenheit degrees) |
| VEKA Softening Point | | D1525/ISO R306 ASTM | 148 | (Fahrenheit degrees) |
| Point Melting | | - | | (Fahrenheit degrees) |
| Combustion (rate) | | UL94 | | |
| Linear Expansion Coefficient | | ASTM D696/ISO 11359 | | Mm/mm. |
| Performance Electrical | Constant Dielectric | 100HZ | ASTM D150/IEC 60250 | | |
| 1MHZ | ASTM D150/IEC 60250 | | |
| Loss Dielectric | 100HZ | ASTM D150/IEC 60250 | | |
| 1MHZ | ASTM D150/IEC 60250 | | |
| Resistivity Volume | | ASTM D257/IEC 60093 | | Omega.Cm |
| Resistivity Surface | | ASTM D257/IEC 60093 | | Omega |
| Resistance Arc | | ASTM D495/IEC 60112 | | |
| Properties Optical | Index Refractive | | ASTM D542/ISO 489 | 1.585 | |
| Transmittance | | ASTM D1003/ISO 13468 | 88 | % |
| Coefficient Fuzzy (Haze) | | ISO 14782 | | % |
Нажмите, чтобы увеличить 
