الصورة الكبيرة
Hot-Dipped Galvanized Wire with Shining Surface - 1.6mm to 2.5mm
High-quality steel wire with bright, glossy finish suitable for industrial and construction applications.
- Wire Diameters: 1.6 mm, 2.0 mm, 2.5 mm
- Surface Finish: Special post-galvanizing wipe or skin pass applied for smooth, reflective, gloss-like finish.
- Corrosion Resistance: Zinc Coating 50-100 g/m2
- base Material: Wire produced from low-carbon SAE 1006 steel for uniform mechanical properties.
- Quality Inspection: SGS Certified
- Tensile Strength: 400-500 MPa
- Coil Weight: 500-700 kg
- Application Areas: Construction, Fencing, Industrial Use
- Manufacturing Process: Hot-Dip Galvanizing + Surface Wipe, Post-galvanizing treatment enhances smoothness and reflective shine compared to standard matte spangle.
- Packaging: Industrial Coils,delivered in tightly wound coils for storage, handling, and easy installation on site.
Hot-Dipped Galvanized Steel Wire for Greece and European Customers
High-quality steel wire coated with zinc for corrosion resistance and long-term industrial use.
- Wire Diameters and Sizes: 0.90, 1.25, 1.60, 2.00, 2.50, 3.05 mm to suit diverse applications.
- Zinc Coating: 130-225 g/m2. Protective hot-dip coating ensures durability based on wire diameter.
- Coil Inner Diameter: 340-500 mm
- Coil Outer Diameter: 850-900 mm
- Coil Weight: 550-650 kg
- Tensile Strength: 340-500 N/mm2
- Elongation: 10% standard, 0.87 mm wire has minimum elongation at break of 7.5%.
- Wrapping Test: Wire passes mandrel test with diameter 4 x nominal wire diameter; no break occurs after one complete turn.
- Electrical Resistivity: Max 138 Ohm.mm2/km
- Surface Finish: Hot-dip galvanizing process ensures bright, even coating.
- Applications: Binding, fencing, reinforcement, mesh, wire fabrication, cable support, and other industrial needs.
Hot-Dipped Galvanized (HDG) Wire Export to Egypt
Primarily used in steel nail manufacturing, industrial wire drawing, and other mechanical descaling processes
- Wire Diameter: 2.28 mm, 2.83 mm, 3.02 mm, 3.30 mm, 3.68 mm
- Diameter Tolerances: ±0.04 mm
- Tensile Strength: 750-1150 N/mm2
- Zinc Coating: Minimum 305 g/m2
- Surface Finish Requirements: Wire surface exhibits a smooth, uniform finish free from residues, irregularities, lumps, cracks, bends, or uneven zinc deposition.
- Coating must be continuous and adherent with no bare spots, tears, or sharp protrusions. Zinc remains adherent after nail modifications.
- Complies with ISO 1461 standards.
- Coil Packaging Requirements: Each coil is secured with 4 metal straps and includes 4 hooks for safe lifting and handling.
- Coil Wrapping: Coils are wrapped with water-resistant kraft paper or plastic film to protect against moisture and environmental damage during transport.
- Applications: Construction, fencing, wire mesh, nail manufacturing, and other industrial uses where galvanized corrosion resistance is required.
Hot-Dipped Fully Galvanized Stay Wire - 7 x 4mm x 12mm Technical Specifications
Hot-Dipped Fully Galvanized Stay Wire 7 x 4mm x 12mm Rolls for Agriculture and Construction Use
- Roll Length and Tolerance: Supplied in 610-meter rolls, with 0% to +5% tolerance.
- Lay Type: Wire lay is Right Hand (RH) for structural stability.
- Wire Construction: 12 mm wire made of 7 strands, 4 mm each.
- Wire Weight: Each strand weighs 0.7095 kg/m, suitable for support.
- Minimum Breaking Force: Minimum breaking force is 96.76 kN, ensuring durability.
- Tensile Strength: Wire tensile strength is 1100 MPa for long-term performance.
- Surface Finish: Hot-Dipped Fully Galvanized for corrosion resistance and outdoor use.
- Delivery Requirements: Delivered in 610 m rolls on wooden bobbins, compliant.
- Wire Diameter: 12 mm diameter provides strength and flexibility for applications.
- Applications: Used in agriculture, fencing, trellises, construction, and industrial structures.
- Packaging & Handling: Rolls wound on bobbins with labels for safe transport.
