запуск :25Kg.
снабжение :23000Kg.
отправка товара :1 В течение дня
покупка сразу же
===under info was translated buy computer, please contact the info poster===
Physical Properties
| Grade: | G-3130 PC Teijin |
|---|---|
| Origin / manufacturer: | G-3130 PC Teijin |
| Application Level: | Injection Grade |
| Brand: | G-3130 PC Teijin |
| Model: | G-3130 PC Teijin |
| Contact Phone 13265203567 QQ1401307760 | |||||
| Performance Items | Test Condition | Test Method | Numerical Description | Company | |
| Mechanical Properties | Tensile Strength (Qiangdu lead Zhang) | D638/ISO ASTM 527 | 126 (1280) | Kg/cm² (MPa) [Lb/in2] | |
| Break Elongation At | D638/ISO ASTM 527 | 3.5 | % | ||
| Tensile Modulus | D638/ISO ASTM 527 | 8240 (84000) | Kg/cm² (MPa) [Lb/in2] | ||
| Elongation Tensile Yield (elongation) | D638/ISO ASTM 527 | % | |||
| At break Tensile Elongation (elongation) | D638/ISO ASTM 527 | % | |||
| Bending Modulus (bending elasticity) | D790/ISO ASTM 178 | 7260 (74000) | Kg/cm² (MPa) [Lb/in2] | ||
| Bending Strength | D790/ISO ASTM 178 | 186 (1900) | Kg/cm² (MPa) [Lb/in2] | ||
| Luo's Hardness | D785 ASTM | ||||
| Impact strength IZOD Notched | 1/4& 23 | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | ||
| -30 1/4& | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| 1/8& 23 | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| -30 1/8& | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| Strength Charpy Impact | 23 (GAP) | D256/ISO ASTM 179 | 160 (16) | Kg· cm/cm (J/M) ft· lb/in | |
| -30 (GAP) | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| 23 (no gap) | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| -30 (no gap) | D256/ISO ASTM 179 | Kg· cm/cm (J/M) ft· lb/in | |||
| Physical Property | Specific Gravity (density) | D792/ISO ASTM 1183 | 1.43 | ||
| Rate Molding Shrinkage | D955 ASTM | % | |||
| Melt Index (flow coefficient) | 200 /5kg | D1238/ISO ASTM 1133 | G/10min | ||
| 220 /10kg | D1238/ISO ASTM 1133 | G/10min | |||
| Rate of Water Absorption 23 /24H | D570/ISO ASTM 62 | 0.12 | % | ||
| Thermal Performance | Temperature Heat Distortion | Annealing | D648/ISO ASTM 75 | (degrees Fahrenheit) | |
| No Annealing | D648/ISO ASTM 75 | (degrees Fahrenheit) | |||
| Point VEKA Softening | ASTM D1525/ISO R306 | (degrees Fahrenheit) | |||
| Melting Point | - | (degrees Fahrenheit) | |||
| Combustion (rate) | UL94 | ||||
| Coefficient Linear Expansion | D696/ISO ASTM 11359 | Mm/mm. | |||
| Electrical Performance | Dielectric Constant | 100HZ | D150/IEC ASTM 60250 | ||
| 1MHZ | D150/IEC ASTM 60250 | ||||
| Dielectric Loss | 100HZ | D150/IEC ASTM 60250 | |||
| 1MHZ | D150/IEC ASTM 60250 | ||||
| Volume Resistivity | D257/IEC ASTM 60093 | Omega.Cm | |||
| Surface Resistivity | D257/IEC ASTM 60093 | Omega | |||
| Arc Resistance | D495/IEC ASTM 60112 | ||||
| Optical Properties | Refractive Index | D542/ISO ASTM 489 | |||
| Transmittance | D1003/ISO ASTM 13468 | % | |||
| Fuzzy Coefficient (Haze) | ISO 14782 | % | |||
| Processing Conditions | Drying Condition | ||||
| Processing Temperature | Nozzle | C | |||
| Front End | C | ||||
| Material Barrel | C | ||||
| Post Section | C | ||||
| Melt Temperature | C | ||||
| Mould Temperature | C | ||||
| Pressure | Injection Pressure | Mpa | |||
| Holding Pressure | Mpa | ||||
| Back Pressure | Mpa | ||||
| Screw Speed | RPM | ||||
| Other | Remarks | ||||
| Color | |||||
| Characteristic | Electronic components, Electrical Appliances | ||||
| Use | |||||